//====== Copyright Valve Corporation, All rights reserved. ==================== #ifndef ISTEAMNETWORKINGSOCKETS #define ISTEAMNETWORKINGSOCKETS #include "steamnetworkingtypes.h" #include "steam_api_common.h" struct SteamNetAuthenticationStatus_t; class ISteamNetworkingConnectionSignaling; class ISteamNetworkingSignalingRecvContext; //----------------------------------------------------------------------------- /// Lower level networking API. /// /// - Connection-oriented API (like TCP, not UDP). When sending and receiving /// messages, a connection handle is used. (For a UDP-style interface, see /// ISteamNetworkingMessages.) In this TCP-style interface, the "server" will /// "listen" on a "listen socket." A "client" will "connect" to the server, /// and the server will "accept" the connection. /// - But unlike TCP, it's message-oriented, not stream-oriented. /// - Mix of reliable and unreliable messages /// - Fragmentation and reassembly /// - Supports connectivity over plain UDP /// - Also supports SDR ("Steam Datagram Relay") connections, which are /// addressed by the identity of the peer. There is a "P2P" use case and /// a "hosted dedicated server" use case. /// /// Note that neither of the terms "connection" nor "socket" necessarily correspond /// one-to-one with an underlying UDP socket. An attempt has been made to /// keep the semantics as similar to the standard socket model when appropriate, /// but some deviations do exist. /// /// See also: ISteamNetworkingMessages, the UDP-style interface. This API might be /// easier to use, especially when porting existing UDP code. class ISteamNetworkingSockets { public: /// Creates a "server" socket that listens for clients to connect to by /// calling ConnectByIPAddress, over ordinary UDP (IPv4 or IPv6) /// /// You must select a specific local port to listen on and set it /// the port field of the local address. /// /// Usually you will set the IP portion of the address to zero (SteamNetworkingIPAddr::Clear()). /// This means that you will not bind to any particular local interface (i.e. the same /// as INADDR_ANY in plain socket code). Furthermore, if possible the socket will be bound /// in "dual stack" mode, which means that it can accept both IPv4 and IPv6 client connections. /// If you really do wish to bind a particular interface, then set the local address to the /// appropriate IPv4 or IPv6 IP. /// /// If you need to set any initial config options, pass them here. See /// SteamNetworkingConfigValue_t for more about why this is preferable to /// setting the options "immediately" after creation. /// /// When a client attempts to connect, a SteamNetConnectionStatusChangedCallback_t /// will be posted. The connection will be in the connecting state. virtual HSteamListenSocket CreateListenSocketIP( const SteamNetworkingIPAddr *localAddress, int nOptions, const SteamNetworkingConfigValue_t *pOptions ) = 0; /// Creates a connection and begins talking to a "server" over UDP at the /// given IPv4 or IPv6 address. The remote host must be listening with a /// matching call to CreateListenSocketIP on the specified port. /// /// A SteamNetConnectionStatusChangedCallback_t callback will be triggered when we start /// connecting, and then another one on either timeout or successful connection. /// /// If the server does not have any identity configured, then their network address /// will be the only identity in use. Or, the network host may provide a platform-specific /// identity with or without a valid certificate to authenticate that identity. (These /// details will be contained in the SteamNetConnectionStatusChangedCallback_t.) It's /// up to your application to decide whether to allow the connection. /// /// By default, all connections will get basic encryption sufficient to prevent /// casual eavesdropping. But note that without certificates (or a shared secret /// distributed through some other out-of-band mechanism), you don't have any /// way of knowing who is actually on the other end, and thus are vulnerable to /// man-in-the-middle attacks. /// /// If you need to set any initial config options, pass them here. See /// SteamNetworkingConfigValue_t for more about why this is preferable to /// setting the options "immediately" after creation. virtual HSteamNetConnection ConnectByIPAddress( const SteamNetworkingIPAddr *address, int nOptions, const SteamNetworkingConfigValue_t *pOptions ) = 0; /// Like CreateListenSocketIP, but clients will connect using ConnectP2P. /// /// nLocalVirtualPort specifies how clients can connect to this socket using /// ConnectP2P. It's very common for applications to only have one listening socket; /// in that case, use zero. If you need to open multiple listen sockets and have clients /// be able to connect to one or the other, then nLocalVirtualPort should be a small /// integer (<1000) unique to each listen socket you create. /// /// If you use this, you probably want to call ISteamNetworkingUtils::InitRelayNetworkAccess() /// when your app initializes. /// /// If you are listening on a dedicated servers in known data center, /// then you can listen using this function instead of CreateHostedDedicatedServerListenSocket, /// to allow clients to connect without a ticket. Any user that owns /// the app and is signed into Steam will be able to attempt to connect to /// your server. Also, a connection attempt may require the client to /// be connected to Steam, which is one more moving part that may fail. When /// tickets are used, then once a ticket is obtained, a client can connect to /// your server even if they got disconnected from Steam or Steam is offline. /// /// If you need to set any initial config options, pass them here. See /// SteamNetworkingConfigValue_t for more about why this is preferable to /// setting the options "immediately" after creation. virtual HSteamListenSocket CreateListenSocketP2P( int nLocalVirtualPort, int nOptions, const SteamNetworkingConfigValue_t *pOptions ) = 0; /// Begin connecting to a peer that is identified using a platform-specific identifier. /// This uses the default rendezvous service, which depends on the platform and library /// configuration. (E.g. on Steam, it goes through the steam backend.) /// /// If you need to set any initial config options, pass them here. See /// SteamNetworkingConfigValue_t for more about why this is preferable to /// setting the options "immediately" after creation. /// /// To use your own signaling service, see: /// - ConnectP2PCustomSignaling /// - k_ESteamNetworkingConfig_Callback_CreateConnectionSignaling virtual HSteamNetConnection ConnectP2P( const SteamNetworkingIdentity *identityRemote, int nRemoteVirtualPort, int nOptions, const SteamNetworkingConfigValue_t *pOptions ) = 0; /// Accept an incoming connection that has been received on a listen socket. /// /// When a connection attempt is received (perhaps after a few basic handshake /// packets have been exchanged to prevent trivial spoofing), a connection interface /// object is created in the k_ESteamNetworkingConnectionState_Connecting state /// and a SteamNetConnectionStatusChangedCallback_t is posted. At this point, your /// application MUST either accept or close the connection. (It may not ignore it.) /// Accepting the connection will transition it either into the connected state, /// or the finding route state, depending on the connection type. /// /// You should take action within a second or two, because accepting the connection is /// what actually sends the reply notifying the client that they are connected. If you /// delay taking action, from the client's perspective it is the same as the network /// being unresponsive, and the client may timeout the connection attempt. In other /// words, the client cannot distinguish between a delay caused by network problems /// and a delay caused by the application. /// /// This means that if your application goes for more than a few seconds without /// processing callbacks (for example, while loading a map), then there is a chance /// that a client may attempt to connect in that interval and fail due to timeout. /// /// If the application does not respond to the connection attempt in a timely manner, /// and we stop receiving communication from the client, the connection attempt will /// be timed out locally, transitioning the connection to the /// k_ESteamNetworkingConnectionState_ProblemDetectedLocally state. The client may also /// close the connection before it is accepted, and a transition to the /// k_ESteamNetworkingConnectionState_ClosedByPeer is also possible depending the exact /// sequence of events. /// /// Returns k_EResultInvalidParam if the handle is invalid. /// Returns k_EResultInvalidState if the connection is not in the appropriate state. /// (Remember that the connection state could change in between the time that the /// notification being posted to the queue and when it is received by the application.) /// /// A note about connection configuration options. If you need to set any configuration /// options that are common to all connections accepted through a particular listen /// socket, consider setting the options on the listen socket, since such options are /// inherited automatically. If you really do need to set options that are connection /// specific, it is safe to set them on the connection before accepting the connection. virtual EResult AcceptConnection( HSteamNetConnection hConn ) = 0; /// Disconnects from the remote host and invalidates the connection handle. /// Any unread data on the connection is discarded. /// /// nReason is an application defined code that will be received on the other /// end and recorded (when possible) in backend analytics. The value should /// come from a restricted range. (See ESteamNetConnectionEnd.) If you don't need /// to communicate any information to the remote host, and do not want analytics to /// be able to distinguish "normal" connection terminations from "exceptional" ones, /// You may pass zero, in which case the generic value of /// k_ESteamNetConnectionEnd_App_Generic will be used. /// /// pszDebug is an optional human-readable diagnostic string that will be received /// by the remote host and recorded (when possible) in backend analytics. /// /// If you wish to put the socket into a "linger" state, where an attempt is made to /// flush any remaining sent data, use bEnableLinger=true. Otherwise reliable data /// is not flushed. /// /// If the connection has already ended and you are just freeing up the /// connection interface, the reason code, debug string, and linger flag are /// ignored. virtual bool CloseConnection( HSteamNetConnection hPeer, int nReason, const char *pszDebug, bool bEnableLinger ) = 0; /// Destroy a listen socket. All the connections that were accepting on the listen /// socket are closed ungracefully. virtual bool CloseListenSocket( HSteamListenSocket hSocket ) = 0; /// Set connection user data. the data is returned in the following places /// - You can query it using GetConnectionUserData. /// - The SteamNetworkingmessage_t structure. /// - The SteamNetConnectionInfo_t structure. (Which is a member of SteamNetConnectionStatusChangedCallback_t.) /// /// Returns false if the handle is invalid. virtual bool SetConnectionUserData( HSteamNetConnection hPeer, int64 nUserData ) = 0; /// Fetch connection user data. Returns -1 if handle is invalid /// or if you haven't set any userdata on the connection. virtual int64 GetConnectionUserData( HSteamNetConnection hPeer ) = 0; /// Set a name for the connection, used mostly for debugging virtual void SetConnectionName( HSteamNetConnection hPeer, const char *pszName ) = 0; /// Fetch connection name. Returns false if handle is invalid virtual bool GetConnectionName( HSteamNetConnection hPeer, char *pszName, int nMaxLen ) = 0; /// Send a message to the remote host on the specified connection. /// /// nSendFlags determines the delivery guarantees that will be provided, /// when data should be buffered, etc. E.g. k_nSteamNetworkingSend_Unreliable /// /// Note that the semantics we use for messages are not precisely /// the same as the semantics of a standard "stream" socket. /// (SOCK_STREAM) For an ordinary stream socket, the boundaries /// between chunks are not considered relevant, and the sizes of /// the chunks of data written will not necessarily match up to /// the sizes of the chunks that are returned by the reads on /// the other end. The remote host might read a partial chunk, /// or chunks might be coalesced. For the message semantics /// used here, however, the sizes WILL match. Each send call /// will match a successful read call on the remote host /// one-for-one. If you are porting existing stream-oriented /// code to the semantics of reliable messages, your code should /// work the same, since reliable message semantics are more /// strict than stream semantics. The only caveat is related to /// performance: there is per-message overhead to retain the /// message sizes, and so if your code sends many small chunks /// of data, performance will suffer. Any code based on stream /// sockets that does not write excessively small chunks will /// work without any changes. /// /// The pOutMessageNumber is an optional pointer to receive the /// message number assigned to the message, if sending was successful. /// /// Returns: /// - k_EResultInvalidParam: invalid connection handle, or the individual message is too big. /// (See k_cbMaxSteamNetworkingSocketsMessageSizeSend) /// - k_EResultInvalidState: connection is in an invalid state /// - k_EResultNoConnection: connection has ended /// - k_EResultIgnored: You used k_nSteamNetworkingSend_NoDelay, and the message was dropped because /// we were not ready to send it. /// - k_EResultLimitExceeded: there was already too much data queued to be sent. /// (See k_ESteamNetworkingConfig_SendBufferSize) virtual EResult SendMessageToConnection( HSteamNetConnection hConn, const void *pData, uint32 cbData, int nSendFlags, int64 *pOutMessageNumber ) = 0; /// Send one or more messages without copying the message payload. /// This is the most efficient way to send messages. To use this /// function, you must first allocate a message object using /// ISteamNetworkingUtils::AllocateMessage. (Do not declare one /// on the stack or allocate your own.) /// /// You should fill in the message payload. You can either let /// it allocate the buffer for you and then fill in the payload, /// or if you already have a buffer allocated, you can just point /// m_pData at your buffer and set the callback to the appropriate function /// to free it. Note that if you use your own buffer, it MUST remain valid /// until the callback is executed. And also note that your callback can be /// invoked at ant time from any thread (perhaps even before SendMessages /// returns!), so it MUST be fast and threadsafe. /// /// You MUST also fill in: /// - m_conn - the handle of the connection to send the message to /// - m_nFlags - bitmask of k_nSteamNetworkingSend_xxx flags. /// /// All other fields are currently reserved and should not be modified. /// /// The library will take ownership of the message structures. They may /// be modified or become invalid at any time, so you must not read them /// after passing them to this function. /// /// pOutMessageNumberOrResult is an optional array that will receive, /// for each message, the message number that was assigned to the message /// if sending was successful. If sending failed, then a negative EResult /// value is placed into the array. For example, the array will hold /// -k_EResultInvalidState if the connection was in an invalid state. /// See ISteamNetworkingSockets::SendMessageToConnection for possible /// failure codes. virtual void SendMessages( int nMessages, SteamNetworkingMessage_t *const *pMessages, int64 *pOutMessageNumberOrResult ) = 0; /// Flush any messages waiting on the Nagle timer and send them /// at the next transmission opportunity (often that means right now). /// /// If Nagle is enabled (it's on by default) then when calling /// SendMessageToConnection the message will be buffered, up to the Nagle time /// before being sent, to merge small messages into the same packet. /// (See k_ESteamNetworkingConfig_NagleTime) /// /// Returns: /// k_EResultInvalidParam: invalid connection handle /// k_EResultInvalidState: connection is in an invalid state /// k_EResultNoConnection: connection has ended /// k_EResultIgnored: We weren't (yet) connected, so this operation has no effect. virtual EResult FlushMessagesOnConnection( HSteamNetConnection hConn ) = 0; /// Fetch the next available message(s) from the connection, if any. /// Returns the number of messages returned into your array, up to nMaxMessages. /// If the connection handle is invalid, -1 is returned. /// /// The order of the messages returned in the array is relevant. /// Reliable messages will be received in the order they were sent (and with the /// same sizes --- see SendMessageToConnection for on this subtle difference from a stream socket). /// /// Unreliable messages may be dropped, or delivered out of order with respect to /// each other or with respect to reliable messages. The same unreliable message /// may be received multiple times. /// /// If any messages are returned, you MUST call SteamNetworkingMessage_t::Release() on each /// of them free up resources after you are done. It is safe to keep the object alive for /// a little while (put it into some queue, etc), and you may call Release() from any thread. virtual int ReceiveMessagesOnConnection( HSteamNetConnection hConn, SteamNetworkingMessage_t **ppOutMessages, int nMaxMessages ) = 0; /// Returns basic information about the high-level state of the connection. virtual bool GetConnectionInfo( HSteamNetConnection hConn, SteamNetConnectionInfo_t *pInfo ) = 0; /// Returns a small set of information about the real-time state of the connection /// Returns false if the connection handle is invalid, or the connection has ended. virtual bool GetQuickConnectionStatus( HSteamNetConnection hConn, SteamNetworkingQuickConnectionStatus *pStats ) = 0; /// Returns detailed connection stats in text format. Useful /// for dumping to a log, etc. /// /// Returns: /// -1 failure (bad connection handle) /// 0 OK, your buffer was filled in and '\0'-terminated /// >0 Your buffer was either nullptr, or it was too small and the text got truncated. /// Try again with a buffer of at least N bytes. virtual int GetDetailedConnectionStatus( HSteamNetConnection hConn, char *pszBuf, int cbBuf ) = 0; /// Returns local IP and port that a listen socket created using CreateListenSocketIP is bound to. /// /// An IPv6 address of ::0 means "any IPv4 or IPv6" /// An IPv6 address of ::ffff:0000:0000 means "any IPv4" virtual bool GetListenSocketAddress( HSteamListenSocket hSocket, SteamNetworkingIPAddr *address ) = 0; /// Create a pair of connections that are talking to each other, e.g. a loopback connection. /// This is very useful for testing, or so that your client/server code can work the same /// even when you are running a local "server". /// /// The two connections will immediately be placed into the connected state, and no callbacks /// will be posted immediately. After this, if you close either connection, the other connection /// will receive a callback, exactly as if they were communicating over the network. You must /// close *both* sides in order to fully clean up the resources! /// /// By default, internal buffers are used, completely bypassing the network, the chopping up of /// messages into packets, encryption, copying the payload, etc. This means that loopback /// packets, by default, will not simulate lag or loss. Passing true for bUseNetworkLoopback will /// cause the socket pair to send packets through the local network loopback device (127.0.0.1) /// on ephemeral ports. Fake lag and loss are supported in this case, and CPU time is expended /// to encrypt and decrypt. /// /// If you wish to assign a specific identity to either connection, you may pass a particular /// identity. Otherwise, if you pass nullptr, the respective connection will assume a generic /// "localhost" identity. If you use real network loopback, this might be translated to the /// actual bound loopback port. Otherwise, the port will be zero. virtual bool CreateSocketPair( HSteamNetConnection *pOutConnection1, HSteamNetConnection *pOutConnection2, bool bUseNetworkLoopback, const SteamNetworkingIdentity *pIdentity1, const SteamNetworkingIdentity *pIdentity2 ) = 0; /// Get the identity assigned to this interface. /// E.g. on Steam, this is the user's SteamID, or for the gameserver interface, the SteamID assigned /// to the gameserver. Returns false and sets the result to an invalid identity if we don't know /// our identity yet. (E.g. GameServer has not logged in. On Steam, the user will know their SteamID /// even if they are not signed into Steam.) virtual bool GetIdentity( SteamNetworkingIdentity *pIdentity ) = 0; /// Indicate our desire to be ready participate in authenticated communications. /// If we are currently not ready, then steps will be taken to obtain the necessary /// certificates. (This includes a certificate for us, as well as any CA certificates /// needed to authenticate peers.) /// /// You can call this at program init time if you know that you are going to /// be making authenticated connections, so that we will be ready immediately when /// those connections are attempted. (Note that essentially all connections require /// authentication, with the exception of ordinary UDP connections with authentication /// disabled using k_ESteamNetworkingConfig_IP_AllowWithoutAuth.) If you don't call /// this function, we will wait until a feature is utilized that that necessitates /// these resources. /// /// You can also call this function to force a retry, if failure has occurred. /// Once we make an attempt and fail, we will not automatically retry. /// In this respect, the behavior of the system after trying and failing is the same /// as before the first attempt: attempting authenticated communication or calling /// this function will call the system to attempt to acquire the necessary resources. /// /// You can use GetAuthenticationStatus or listen for SteamNetAuthenticationStatus_t /// to monitor the status. /// /// Returns the current value that would be returned from GetAuthenticationStatus. virtual ESteamNetworkingAvailability InitAuthentication() = 0; /// Query our readiness to participate in authenticated communications. A /// SteamNetAuthenticationStatus_t callback is posted any time this status changes, /// but you can use this function to query it at any time. /// /// The value of SteamNetAuthenticationStatus_t::m_eAvail is returned. If you only /// want this high level status, you can pass NULL for pDetails. If you want further /// details, pass non-NULL to receive them. virtual ESteamNetworkingAvailability GetAuthenticationStatus( SteamNetAuthenticationStatus_t *pDetails ) = 0; // // Poll groups. A poll group is a set of connections that can be polled efficiently. // (In our API, to "poll" a connection means to retrieve all pending messages. We // actually don't have an API to "poll" the connection *state*, like BSD sockets.) // /// Create a new poll group. /// /// You should destroy the poll group when you are done using DestroyPollGroup virtual HSteamNetPollGroup CreatePollGroup() = 0; /// Destroy a poll group created with CreatePollGroup(). /// /// If there are any connections in the poll group, they are removed from the group, /// and left in a state where they are not part of any poll group. /// Returns false if passed an invalid poll group handle. virtual bool DestroyPollGroup( HSteamNetPollGroup hPollGroup ) = 0; /// Assign a connection to a poll group. Note that a connection may only belong to a /// single poll group. Adding a connection to a poll group implicitly removes it from /// any other poll group it is in. /// /// You can pass k_HSteamNetPollGroup_Invalid to remove a connection from its current /// poll group without adding it to a new poll group. /// /// If there are received messages currently pending on the connection, an attempt /// is made to add them to the queue of messages for the poll group in approximately /// the order that would have applied if the connection was already part of the poll /// group at the time that the messages were received. /// /// Returns false if the connection handle is invalid, or if the poll group handle /// is invalid (and not k_HSteamNetPollGroup_Invalid). virtual bool SetConnectionPollGroup( HSteamNetConnection hConn, HSteamNetPollGroup hPollGroup ) = 0; /// Same as ReceiveMessagesOnConnection, but will return the next messages available /// on any connection in the poll group. Examine SteamNetworkingMessage_t::m_conn /// to know which connection. (SteamNetworkingMessage_t::m_nConnUserData might also /// be useful.) /// /// Delivery order of messages among different connections will usually match the /// order that the last packet was received which completed the message. But this /// is not a strong guarantee, especially for packets received right as a connection /// is being assigned to poll group. /// /// Delivery order of messages on the same connection is well defined and the /// same guarantees are present as mentioned in ReceiveMessagesOnConnection. /// (But the messages are not grouped by connection, so they will not necessarily /// appear consecutively in the list; they may be interleaved with messages for /// other connections.) virtual int ReceiveMessagesOnPollGroup( HSteamNetPollGroup hPollGroup, SteamNetworkingMessage_t **ppOutMessages, int nMaxMessages ) = 0; // // Clients connecting to dedicated servers hosted in a data center, // using tickets issued by your game coordinator. If you are not // issuing your own tickets to restrict who can attempt to connect // to your server, then you won't use these functions. // /// Call this when you receive a ticket from your backend / matchmaking system. Puts the /// ticket into a persistent cache, and optionally returns the parsed ticket. /// /// See stamdatagram_ticketgen.h for more details. virtual bool ReceivedRelayAuthTicket( const void *pvTicket, int cbTicket, SteamDatagramRelayAuthTicket *pOutParsedTicket ) = 0; /// Search cache for a ticket to talk to the server on the specified virtual port. /// If found, returns the number of seconds until the ticket expires, and optionally /// the complete cracked ticket. Returns 0 if we don't have a ticket. /// /// Typically this is useful just to confirm that you have a ticket, before you /// call ConnectToHostedDedicatedServer to connect to the server. virtual int FindRelayAuthTicketForServer( const SteamNetworkingIdentity *identityGameServer, int nRemoteVirtualPort, SteamDatagramRelayAuthTicket *pOutParsedTicket ) = 0; /// Client call to connect to a server hosted in a Valve data center, on the specified virtual /// port. You must have placed a ticket for this server into the cache, or else this connect /// attempt will fail! If you are not issuing your own tickets, then to connect to a dedicated /// server via SDR in auto-ticket mode, use ConnectP2P. (The server must be configured to allow /// this type of connection by listening using CreateListenSocketP2P.) /// /// You may wonder why tickets are stored in a cache, instead of simply being passed as an argument /// here. The reason is to make reconnection to a gameserver robust, even if the client computer loses /// connection to Steam or the central backend, or the app is restarted or crashes, etc. /// /// If you use this, you probably want to call ISteamNetworkingUtils::InitRelayNetworkAccess() /// when your app initializes /// /// If you need to set any initial config options, pass them here. See /// SteamNetworkingConfigValue_t for more about why this is preferable to /// setting the options "immediately" after creation. virtual HSteamNetConnection ConnectToHostedDedicatedServer( const SteamNetworkingIdentity *identityTarget, int nRemoteVirtualPort, int nOptions, const SteamNetworkingConfigValue_t *pOptions ) = 0; // // Servers hosted in data centers known to the Valve relay network // /// Returns the value of the SDR_LISTEN_PORT environment variable. This /// is the UDP server your server will be listening on. This will /// configured automatically for you in production environments. /// /// In development, you'll need to set it yourself. See /// https://partner.steamgames.com/doc/api/ISteamNetworkingSockets /// for more information on how to configure dev environments. virtual uint16 GetHostedDedicatedServerPort() = 0; /// Returns 0 if SDR_LISTEN_PORT is not set. Otherwise, returns the data center the server /// is running in. This will be k_SteamDatagramPOPID_dev in non-production environment. virtual SteamNetworkingPOPID GetHostedDedicatedServerPOPID() = 0; /// Return info about the hosted server. This contains the PoPID of the server, /// and opaque routing information that can be used by the relays to send traffic /// to your server. /// /// You will need to send this information to your backend, and put it in tickets, /// so that the relays will know how to forward traffic from /// clients to your server. See SteamDatagramRelayAuthTicket for more info. /// /// Also, note that the routing information is contained in SteamDatagramGameCoordinatorServerLogin, /// so if possible, it's preferred to use GetGameCoordinatorServerLogin to send this info /// to your game coordinator service, and also login securely at the same time. /// /// On a successful exit, k_EResultOK is returned /// /// Unsuccessful exit: /// - Something other than k_EResultOK is returned. /// - k_EResultInvalidState: We are not configured to listen for SDR (SDR_LISTEN_SOCKET /// is not set.) /// - k_EResultPending: we do not (yet) have the authentication information needed. /// (See GetAuthenticationStatus.) If you use environment variables to pre-fetch /// the network config, this data should always be available immediately. /// - A non-localized diagnostic debug message will be placed in m_data that describes /// the cause of the failure. /// /// NOTE: The returned blob is not encrypted. Send it to your backend, but don't /// directly share it with clients. virtual EResult GetHostedDedicatedServerAddress( SteamDatagramHostedAddress *pRouting ) = 0; /// Create a listen socket on the specified virtual port. The physical UDP port to use /// will be determined by the SDR_LISTEN_PORT environment variable. If a UDP port is not /// configured, this call will fail. /// /// This call MUST be made through the SteamGameServerNetworkingSockets() interface. /// /// This function should be used when you are using the ticket generator library /// to issue your own tickets. Clients connecting to the server on this virtual /// port will need a ticket, and they must connect using ConnectToHostedDedicatedServer. /// /// If you need to set any initial config options, pass them here. See /// SteamNetworkingConfigValue_t for more about why this is preferable to /// setting the options "immediately" after creation. virtual HSteamListenSocket CreateHostedDedicatedServerListenSocket( int nLocalVirtualPort, int nOptions, const SteamNetworkingConfigValue_t *pOptions ) = 0; /// Generate an authentication blob that can be used to securely login with /// your backend, using SteamDatagram_ParseHostedServerLogin. (See /// steamdatagram_gamecoordinator.h) /// /// Before calling the function: /// - Populate the app data in pLoginInfo (m_cbAppData and m_appData). You can leave /// all other fields uninitialized. /// - *pcbSignedBlob contains the size of the buffer at pBlob. (It should be /// at least k_cbMaxSteamDatagramGameCoordinatorServerLoginSerialized.) /// /// On a successful exit: /// - k_EResultOK is returned /// - All of the remaining fields of pLoginInfo will be filled out. /// - *pcbSignedBlob contains the size of the serialized blob that has been /// placed into pBlob. /// /// Unsuccessful exit: /// - Something other than k_EResultOK is returned. /// - k_EResultNotLoggedOn: you are not logged in (yet) /// - See GetHostedDedicatedServerAddress for more potential failure return values. /// - A non-localized diagnostic debug message will be placed in pBlob that describes /// the cause of the failure. /// /// This works by signing the contents of the SteamDatagramGameCoordinatorServerLogin /// with the cert that is issued to this server. In dev environments, it's OK if you do /// not have a cert. (You will need to enable insecure dev login in SteamDatagram_ParseHostedServerLogin.) /// Otherwise, you will need a signed cert. /// /// NOTE: The routing blob returned here is not encrypted. Send it to your backend /// and don't share it directly with clients. virtual EResult GetGameCoordinatorServerLogin( SteamDatagramGameCoordinatorServerLogin *pLoginInfo, int *pcbSignedBlob, void *pBlob ) = 0; // // Relayed connections using custom signaling protocol // // This is used if you have your own method of sending out-of-band // signaling / rendezvous messages through a mutually trusted channel. // /// Create a P2P "client" connection that does signaling over a custom /// rendezvous/signaling channel. /// /// pSignaling points to a new object that you create just for this connection. /// It must stay valid until Release() is called. Once you pass the /// object to this function, it assumes ownership. Release() will be called /// from within the function call if the call fails. Furthermore, until Release() /// is called, you should be prepared for methods to be invoked on your /// object from any thread! You need to make sure your object is threadsafe! /// Furthermore, you should make sure that dispatching the methods is done /// as quickly as possible. /// /// This function will immediately construct a connection in the "connecting" /// state. Soon after (perhaps before this function returns, perhaps in another thread), /// the connection will begin sending signaling messages by calling /// ISteamNetworkingConnectionSignaling::SendSignal. /// /// When the remote peer accepts the connection (See /// ISteamNetworkingSignalingRecvContext::OnConnectRequest), /// it will begin sending signaling messages. When these messages are received, /// you can pass them to the connection using ReceivedP2PCustomSignal. /// /// If you know the identity of the peer that you expect to be on the other end, /// you can pass their identity to improve debug output or just detect bugs. /// If you don't know their identity yet, you can pass NULL, and their /// identity will be established in the connection handshake. /// /// If you use this, you probably want to call ISteamNetworkingUtils::InitRelayNetworkAccess() /// when your app initializes /// /// If you need to set any initial config options, pass them here. See /// SteamNetworkingConfigValue_t for more about why this is preferable to /// setting the options "immediately" after creation. virtual HSteamNetConnection ConnectP2PCustomSignaling( ISteamNetworkingConnectionSignaling *pSignaling, const SteamNetworkingIdentity *pPeerIdentity, int nRemoteVirtualPort, int nOptions, const SteamNetworkingConfigValue_t *pOptions ) = 0; /// Called when custom signaling has received a message. When your /// signaling channel receives a message, it should save off whatever /// routing information was in the envelope into the context object, /// and then pass the payload to this function. /// /// A few different things can happen next, depending on the message: /// /// - If the signal is associated with existing connection, it is dealt /// with immediately. If any replies need to be sent, they will be /// dispatched using the ISteamNetworkingConnectionSignaling /// associated with the connection. /// - If the message represents a connection request (and the request /// is not redundant for an existing connection), a new connection /// will be created, and ReceivedConnectRequest will be called on your /// context object to determine how to proceed. /// - Otherwise, the message is for a connection that does not /// exist (anymore). In this case, we *may* call SendRejectionReply /// on your context object. /// /// In any case, we will not save off pContext or access it after this /// function returns. /// /// Returns true if the message was parsed and dispatched without anything /// unusual or suspicious happening. Returns false if there was some problem /// with the message that prevented ordinary handling. (Debug output will /// usually have more information.) /// /// If you expect to be using relayed connections, then you probably want /// to call ISteamNetworkingUtils::InitRelayNetworkAccess() when your app initializes virtual bool ReceivedP2PCustomSignal( const void *pMsg, int cbMsg, ISteamNetworkingSignalingRecvContext *pContext ) = 0; // // Certificate provision by the application. On Steam, we normally handle all this automatically // and you will not need to use these advanced functions. // /// Get blob that describes a certificate request. You can send this to your game coordinator. /// Upon entry, *pcbBlob should contain the size of the buffer. On successful exit, it will /// return the number of bytes that were populated. You can pass pBlob=NULL to query for the required /// size. (256 bytes is a very conservative estimate.) /// /// Pass this blob to your game coordinator and call SteamDatagram_CreateCert. virtual bool GetCertificateRequest( int *pcbBlob, void *pBlob, SteamNetworkingErrMsg *errMsg ) = 0; /// Set the certificate. The certificate blob should be the output of /// SteamDatagram_CreateCert. virtual bool SetCertificate( const void *pCertificate, int cbCertificate, SteamNetworkingErrMsg *errMsg ) = 0; /// Invoke all callback functions queued for this interface. /// See k_ESteamNetworkingConfig_Callback_ConnectionStatusChanged, etc /// /// You don't need to call this if you are using Steam's callback dispatch /// mechanism (SteamAPI_RunCallbacks and SteamGameserver_RunCallbacks). virtual void RunCallbacks() = 0; protected: ~ISteamNetworkingSockets(); // Silence some warnings }; #define STEAMNETWORKINGSOCKETS_INTERFACE_VERSION "SteamNetworkingSockets009" // Global accessors // Using standalone lib #ifdef STEAMNETWORKINGSOCKETS_STANDALONELIB // Standalone lib. static_assert( STEAMNETWORKINGSOCKETS_INTERFACE_VERSION[24] == '9', "Version mismatch" ); STEAMNETWORKINGSOCKETS_INTERFACE ISteamNetworkingSockets *SteamNetworkingSockets_LibV9(); inline ISteamNetworkingSockets *SteamNetworkingSockets_Lib() { return SteamNetworkingSockets_LibV9(); } // If running in context of steam, we also define a gameserver instance. #ifdef STEAMNETWORKINGSOCKETS_STEAM STEAMNETWORKINGSOCKETS_INTERFACE ISteamNetworkingSockets *SteamGameServerNetworkingSockets_LibV9(); inline ISteamNetworkingSockets *SteamGameServerNetworkingSockets_Lib() { return SteamGameServerNetworkingSockets_LibV9(); } #endif #ifndef STEAMNETWORKINGSOCKETS_STEAMAPI inline ISteamNetworkingSockets *SteamNetworkingSockets() { return SteamNetworkingSockets_LibV9(); } #ifdef STEAMNETWORKINGSOCKETS_STEAM inline ISteamNetworkingSockets *SteamGameServerNetworkingSockets() { return SteamGameServerNetworkingSockets_LibV9(); } #endif #endif #endif // Using Steamworks SDK #ifdef STEAMNETWORKINGSOCKETS_STEAMAPI // Steamworks SDK STEAM_DEFINE_USER_INTERFACE_ACCESSOR( ISteamNetworkingSockets *, SteamNetworkingSockets_SteamAPI, STEAMNETWORKINGSOCKETS_INTERFACE_VERSION ); STEAM_DEFINE_GAMESERVER_INTERFACE_ACCESSOR( ISteamNetworkingSockets *, SteamGameServerNetworkingSockets_SteamAPI, STEAMNETWORKINGSOCKETS_INTERFACE_VERSION ); #ifndef STEAMNETWORKINGSOCKETS_STANDALONELIB inline ISteamNetworkingSockets *SteamNetworkingSockets() { return SteamNetworkingSockets_SteamAPI(); } inline ISteamNetworkingSockets *SteamGameServerNetworkingSockets() { return SteamGameServerNetworkingSockets_SteamAPI(); } #endif #endif /// Callback struct used to notify when a connection has changed state #if defined( VALVE_CALLBACK_PACK_SMALL ) #pragma pack( push, 4 ) #elif defined( VALVE_CALLBACK_PACK_LARGE ) #pragma pack( push, 8 ) #else #error "Must define VALVE_CALLBACK_PACK_SMALL or VALVE_CALLBACK_PACK_LARGE" #endif /// This callback is posted whenever a connection is created, destroyed, or changes state. /// The m_info field will contain a complete description of the connection at the time the /// change occurred and the callback was posted. In particular, m_eState will have the /// new connection state. /// /// You will usually need to listen for this callback to know when: /// - A new connection arrives on a listen socket. /// m_info.m_hListenSocket will be set, m_eOldState = k_ESteamNetworkingConnectionState_None, /// and m_info.m_eState = k_ESteamNetworkingConnectionState_Connecting. /// See ISteamNetworkigSockets::AcceptConnection. /// - A connection you initiated has been accepted by the remote host. /// m_eOldState = k_ESteamNetworkingConnectionState_Connecting, and /// m_info.m_eState = k_ESteamNetworkingConnectionState_Connected. /// Some connections might transition to k_ESteamNetworkingConnectionState_FindingRoute first. /// - A connection has been actively rejected or closed by the remote host. /// m_eOldState = k_ESteamNetworkingConnectionState_Connecting or k_ESteamNetworkingConnectionState_Connected, /// and m_info.m_eState = k_ESteamNetworkingConnectionState_ClosedByPeer. m_info.m_eEndReason /// and m_info.m_szEndDebug will have for more details. /// NOTE: upon receiving this callback, you must still destroy the connection using /// ISteamNetworkingSockets::CloseConnection to free up local resources. (The details /// passed to the function are not used in this case, since the connection is already closed.) /// - A problem was detected with the connection, and it has been closed by the local host. /// The most common failure is timeout, but other configuration or authentication failures /// can cause this. m_eOldState = k_ESteamNetworkingConnectionState_Connecting or /// k_ESteamNetworkingConnectionState_Connected, and m_info.m_eState = k_ESteamNetworkingConnectionState_ProblemDetectedLocally. /// m_info.m_eEndReason and m_info.m_szEndDebug will have for more details. /// NOTE: upon receiving this callback, you must still destroy the connection using /// ISteamNetworkingSockets::CloseConnection to free up local resources. (The details /// passed to the function are not used in this case, since the connection is already closed.) /// /// Remember that callbacks are posted to a queue, and networking connections can /// change at any time. It is possible that the connection has already changed /// state by the time you process this callback. /// /// Also note that callbacks will be posted when connections are created and destroyed by your own API calls. struct SteamNetConnectionStatusChangedCallback_t { enum { k_iCallback = k_iSteamNetworkingSocketsCallbacks + 1 }; /// Connection handle HSteamNetConnection m_hConn; /// Full connection info SteamNetConnectionInfo_t m_info; /// Previous state. (Current state is in m_info.m_eState) ESteamNetworkingConnectionState m_eOldState; }; /// A struct used to describe our readiness to participate in authenticated, /// encrypted communication. In order to do this we need: /// /// - The list of trusted CA certificates that might be relevant for this /// app. /// - A valid certificate issued by a CA. /// /// This callback is posted whenever the state of our readiness changes. struct SteamNetAuthenticationStatus_t { enum { k_iCallback = k_iSteamNetworkingSocketsCallbacks + 2 }; /// Status ESteamNetworkingAvailability m_eAvail; /// Non-localized English language status. For diagnostic/debugging /// purposes only. char m_debugMsg[ 256 ]; }; #pragma pack( pop ) #endif // ISTEAMNETWORKINGSOCKETS